How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add an additional ignition key. This requires the use of a handheld computer called Tech-2 which is to be used by the dealer. Then a new car key and transponder need to be bought and programmed to the car.
It is an excellent idea to rotate your keys so that one doesn't get worn out more quickly than the other. This will help to keep your keys in top condition.
Replacement Case
The new key fobs are not like the older Saab keys. They feature electronic components that make them difficult to copy. This has made theft of cars significantly more difficult than it was twenty years ago. But, it has also made the replacement of lost keys a much more expensive task.
Every owner of a Saab 9-3 needs to have at minimum two working keys. If one is lost it is expensive to purchase a new one for the car because it involves replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 for this.
There are ways to reduce these high cost. saab 93 key programming providers will look up the code on a spare key (usually the same one that opens the doors and turns on the ignition) and cut a brand new key blade out of metal for less than the dealer's cost. The key must be the exact identical to the original one for it to function in your vehicle.
Follow these steps to replace the case. You'll need a flathead and a lot of patience. With the screwdriver, pry apart the plastic and remove the emergency key. Once the case is opened, take out the electronics and place them into your new case. Be sure to put the correct badge and key back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced quickly and easily. Cyclone's YouTube video Cyd demonstrates the procedure for replacing the remote fob battery in just four steps. This tutorial should work with any modern Saab key fob. However, the process may differ slightly.
The button is normally located next to the Saab logo on the back of the fob. This button is usually on the back of the fob, next to the Saab Logo. Next take a flathead screwdriver into the small hole in this button. This will be enough to allow you to open the case of the fob to allow you to replace the battery.
After the new battery CR1632 is in place, you can reassemble the remote key fob and then program it to your car. The whole process should not be more than an hour. It's a simple process that does not require any special tools.
If you lose your key, the process is somewhat more complex however it can be accomplished. The dealer needs to first determine the VIN of the vehicle before requesting an additional TWICE module and key blade with the correct unique code. Then, they'll have to cut the new key and then program it with an innovative software tool called MDI.
Replacement Key Fob
The key fob has a battery that is used to lock and unlock your vehicle. The batteries last for a period of, and they will eventually expire. This is a problem that happens to all cars and the good news is that you can change the batteries on most key fobs and not have to replace the whole case. Amazon sells fobs for replacement that already have all the electronics in place. You can simply pop the case open and replace the batteries. It is necessary to remove the emergency key before you can replace the batteries. To do this, you need to insert the screwdriver of a small flat head into the slot that is in the middle of the. The case will split once you work the screwdriver all around it.
If you're looking to replace your keys, keep a spare in your possession. This can save you a lot of money. If you have an extra key, ask the dealer to cut it and program it to your vehicle. This is a lot less expensive than purchasing a new fob.
If you do not have a spare key car key, you can add another key to your car, but this requires a lot of research and effort. The cost of adding a second key is a few hundred dollars, and it requires programming of the car's computer. This can be accomplished by a professional, however it's an expensive option for most owners.
Replacement Ignition
Contrary to earlier Saab automobiles, the current SAAB 9-3 models are equipped with an extremely sophisticated alarm system that is based on a coded key. If you lose only one key, it could be expensive to add another one since the car needs to include a computer and be programmed to accept a new key. Locksmiths typically aren't able to program this, and even dealers can charge several hundred dollars just to program the new key!
Dealers will charge you the highest price to replace your car's computer (also known as the CIM or SAAB twice) if you lose the only working key. Instead we can reprogram the EEPROM on your existing car computer, preparing it to accept a second key, slashing over 50% of the amount you pay at a dealership.
If you've been a long-time owner of a 03-11 SAAB 9-3, then you likely are aware that the ignition key isn't very robust. If your ignition key is not working properly, you should think about replacing it. They can become very sticky and the buttons can fall off. It's not as difficult as it seems to replace the ignition key. With the appropriate tools, it could be accomplished quickly.